0) 333 772 0043
LEGIONELLA IN DETAIL
WHAT IS ANOLYTE AND ECA WATER
WHAT IS THE AQUADRON
WATER TREATMENT TECHNIQUES
WHAT IS LEGIONELLA?
WHAT IS PSEUDOMONAS?
HYGIENE IN HOT WATER SYSTEMS
HYGIENE IN COLD WATER SYSTEMS
BUILDING SPECIFIC ISSUES
HEAT LOSS COST CALCULATOR
AQUADRON IN BEVERAGE PRODUCTION
AQUADRON IN BREWING
AQUADRON LEGIONELLA CONTROL INFOGRAPHIC
AQUADRON BEVERAGE HYGIENE INFOGRAPHIC
THERMAL MIXING VALVES AND LEGIONELLA RISK
IS YOUR BIOCIDE LEGAL?
HEAT LOSS IN HOT WATER SYSTEMS CALCULATIONS
BEVERAGE CIP USING ANOLYTE
BEVERAGE KEY POINTS
50+ beverage production sites already use Aquadron for cost-effective, non-hazardous, disinfection.
THE BENEFITS OF THE AQUADRON
The primary aim of the Aquadron is to improve hygiene conditions in the beverage production and filling process.
We offer -
An increase in filler hygiene
- we can disinfect the filler 24/7 and disinfect bottles and caps.
A reduction in chemical cost
- Anolyte production is likely to cost you only a few hundred pounds per annum.
An improvement in waste water quality
(lower BOD, COD and AOX).
Less handling of hazardous chemicals
- Anolyte is non-hazardous.
Improved filler CIP
- our experience is that we can reduce CIP times by 20% - 30%.
For more details see the following articles -
Aquadron Use In Beverage Production
Aquadron Use in Brewing
Anolyte replaces the disinfection agents that you currently use - it is cheaper and safer and achieves comparable kill rates.
In CIP the cost of Anolyte is significantly lower than using steam or peracetic acid. The water use for post disinfection flushing is also not needed.
Using Anolyte removes some of the CIP steps that have previously been carried out. This saves time and water.